DSC-971 WARNING MESSAGES

  

1. No Job File

2. Open File Error

3. No USB Disk

4. Sensor Error

5. File Has Changed

6. Job Completed

7. Line Out Of Range

8. File Error

9. Write Memory Error

10. Memory Id Error

11. Verifying Ok

12. Verifying Failed

13.Verifying

14. Memory Overflow

15. File Type Error

16.Ok Restart

17.Failed Contact Us

18. Z Out Of Range

 

 

During processing, if the machine encounters a problem, an error message will be displayed. The machine spindle will then be raised to its safety height. Press “ESC” key to go to the main menu to find out the problem and restart the job. The machine must be restarted by turning it off and then on.
 

5.1 Errors
Error 1: System Error. Please contact ROC-Mese.
Error 2: Job Buffer Empty. The job is empty.
Error 3： X out of range.
Error 4： Y out of range
Error 5： Z out of range
Error 6: Code Buffer Empty
Error 7: File Error
The file has no data or the job is empty.
Reason 1： The code is incorrect in the file.
Reason 2： The speed is too fast, the feed rate speed must be lowered. Restart the job after
this.
Error 8: Code Error Oxff
Inside the file, some of the code is incorrect.
Reason 1： The original file had errors in the code.
Reason 2： USB Disk has a virus and has corrupted the file. The USB disk must be
reformatted and the files must be recopied.
Reason 3： Internal memory chips have a problem. Main board must be changed.
Error 9: System Error Please Restart
Error 10: System Error (Feed rate Overflow